Ferris HydroCut HC32KAV13 - Page 41

PART NO. DESCRIPTIONREF NO. QTY.
36" Mower Deck - Height Adjustment
Footnotes
1 25162 4 WASHER, 1" SAE
2 47682 1 DECK LIFT PIVOT - REAR
3 25356 8 SHOULDER BOLT, 1/2 x 3/8
4 47655 1 HEIGHT ADJUST ROD
5 48526 1 LINKAGE ADJUSTER
6 25100 1 NUT, 3/8-16 Hex Side Lock
7 25201-6 1 COTTER PIN, 3/32" x 3/4"
8 25046 8 NUT, 3/8-16 Hex Top Lock
9 10546 1 COLLAR, 3/8" Set
10 25156 6 WASHER, 3/8" SAE
11 22645 1 SPRING, Compression
12 47710 4 DECK ADJUST LINK
13 25011-8 4 BOLT, 5/16-18 x 1
14 25139 4 NUT, 5/16-18 Hex Large Serrated Flange
15 25013-10 2 BOLT, 3/8-16 x 1-1/4
16 44933 2 SPACER, .39 x .75 x .38
17 48549 2 COLLAR, Double Split, 1"
18 25128 7 NUT, 3/8-16 Hex Serrated Flange
19 47737 1 CUT HEIGHT INDICATOR
20 25034 1 NUT, 3/8-16 Hex
21 47681 1 DECK LIFT PIVOT - FRONT
22 25013-8 4 BOLT, 3/8-16 x 1
23 48439 2 HANGER PLATE
24 20095 1 GREASE FITTING
25 48548 1 WASHER, Nylon, 3/8
The above parts group applies to the following Mfg. Nos.:
2005
41
© Copyright Ferris Industries. All Rights Reserved.
HC36KAV13E
TP 400-7077-08-HC-F