PART NO. DESCRIPTIONREF NO. QTY.
36" Mower Deck - Housing, Spindles, Blades & Pulleys
Footnotes
1 23262 1 BELT
2 25324-32 2 CARRIAGE BOLT, 1/2-13 x 4
3 25158 2 WASHER, 1/2" SAE
4 25056 2 NUT, 1/2-13 Hex Nylon Lock
5 45023 2 SPACER, .52 x 1.00 x .44
6 23264 1 IDLER PULLEY
7 48994 1 IDLER MOUNT
8 25405 2 NUT, 3/4-16 Hex
9 25406 2 WASHER, 3/4" Belleville
10 49218 1 SPACER, 1.00 x 1.57 x .69
11 49238 1 BELT, Chevron
12 25389 2 KEY, 1/4 SQ. X 3/4
13 48977 2 SPROCKET, Chevron
14 25392 8 NUT, 5/16-18 Hex Nylock Flange
15 61175 2 SPINDLE ASSEMBLY, Complete (Includes Ref No. 16 - 22)
16 23329 2 GREASE FITTING
17 49793 4 TRASH SHIELD
18 23330 4 BEARING
19 23296 2 RELIEF VALVE
20 61097 2 SPINDLE HOUSING
21 61099 2 SPACER, 1.00 x 1.25 x 1.75
22 61137 2 SPINDLE SHAFT w/ SADDLE
23 23156 8 BOLT, Flange Head, 5/16-18 x 1-1/4
24 21227 2 MOWER BLADE, 18"
25 25159 2 WASHER, 5/8" USS
26 25320-14 2 BOLT, 5/8-11 x 1-3/4
27 61727 1 PULLEY RETAINER
28 25011-6 2 BOLT, 5/16-18 x 3/4
29 48954 1 BAFFLE
30 22788 1 SPRING, Compression
31 48735 1 MOWER DECK HOUSING
32 25144-6 1 CARRIAGE BOLT, 1/4-20 x 3/4
33 25144 1 CARRIAGE BOLT, 1/4-20 x 1-1/4
34 1960518 2 PUSH NUT, 1/4, Black
35 61511 1 CHUTE SUPPORT PLATE
36 25154 2 WASHER, 1/4" SAE
37 1704873 1 CLAMP
38 1723938 1 SPRING, Torsion
39 1705449 1 DEFLECTOR
40 1723323 1 SPRING END CAP
41 25391 2 NUT, 1/4-20 Hex Nylock Flange
The above parts group applies to the following Mfg. Nos.:
2005
43
© Copyright Ferris Industries. All Rights Reserved.
HC36KAV13E
TP 400-7077-08-HC-F
To Next Page
Loading...
