Ferris HydroCut HC32KAV13 - Page 7

PART NO. DESCRIPTIONREF NO. QTY.
Engine Frame & Handle Bars Group - Manual Start
Footnotes
1 22180 1 SWITCH, PTO
2 22222 1 SWITCH RETAINER RING
3 25035 1 NUT, 3/8-24 Hex
4 46501 1 CABLE, Choke Control, 47"
5 25010-6 2 BOLT, 1/4-20 x 3/4
6 21842 1 SWITCH, Ignition, Complete (Includes Ref No. 7 - 9)
7 22789 1 KEY, Ignition, Molded Set
8 22790 1 COVER
9 22791 1 PLASTIC NUT
10 47629 1 CABLE, Throttle Control, 46"
11 21841 2 GRIP, Foam
12 25095 2 NUT, 1/4-20 Hex Nylon Lock
13 47905 1 HANDLE BAR ASSEMBLY
14 25179-4 2 SCREW, #10-24 x 1/2
15 21769 1 SWITCH, Plunger, NC
16 25029 2 NUT, #10-24 Hex
17 22308 4 BODY CLIP, 5/16-18
18 47735 1 REAR SHIELD
19 25011-6 4 BOLT, 5/16-18 x 3/4
20 25155 4 WASHER, 5/16" SAE
21 48230 1 ENGINE DECK ASSEMBLY
The above parts group applies to the following Mfg. Nos.:
2005
7
© Copyright Ferris Industries. All Rights Reserved.
HC32KAV13
TP 400-7077-08-HC-F