SYSTEM SETTINGS
14
1. Press RESET/SETUP to enter the system setup mode.
2. Press the EDIT key repeatedly to select the setup menu
you want to enter.
Each time you press the EDIT key, you can select one of the f
ollowing settings:
①Trigger Time: Adjusts the length of the trigger time.
②Tone Control Equalizer (Bass): Adjust the equalizer. In the -63-+63 range, the
default value is +42.
③Tone Control Equalizer (Treble): Adjust the equalizer. In the -63-+63 range, the
default value is +32.
④Reverb Volume Control: Adjusts the reverb volume. Between 00 and 127, the
default value is 20.
⑤Reverb Control Type: Select the type of reverb control. From room to hall, the
default value is aspect.
⑥Digital Audio Settings (TX Channel): Select the digital output channel. Switch
between 01 and 16. The default value is 10.
⑦Digital Audio Setup (RX Channel): Select the digital output channel Switch be-
tween 01--16, the default value is 01.
⑧Digital Audio Local Settings: Turns local mode on or off. The default is on.
3. Turn the VALUE knob to select the volume that suits you.
To Next Page
Loading...
