-transfer system 41
Care is to be taken that the transport of the stations is to be executed only by a
suitable transport vehicle. The weight amounts up to 100 kg, depending on the
station.
The route of transport is to be cleared in advance, to be accessible to the transport
vehicle. Installation of warning signs or barriers may be required.
The transport boxes are to be opened with care, as additional components, such as
computers may be contained in the delivery, which are to be protected from falling
out.
Once the transport box has been opened and the possibly contained additional
components removed, the station can be taken out to be transported to its
destination by means of two fork-lifts or one fork-lift truck.
Please check the stability of all of the profile connectors by means of an Allen key
size 6. The connectors may have come loose during transport, due to inevitable
vibration.
Pay special attention to all overhanging components. Sensors and similar small
parts are very easily damaged in case of improper transport.
The stations are not to be picked up by or even under the mounted feet increased
risk of becoming trapped or contused.
To Next Page
