EasyManua.ls Logo

Festo MPS transfersystem - 4 Operation; General Notes on Operation; Handling Regulations; Operating Regulations

Festo MPS transfersystem
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-transfer system 89
The chapter Operation describes the control units required for the operation, as well
as start-up and close-down of the system.
The stations demand strict adherence to certain rules of operation. Negligence in

physical health can not be excluded.
Strict observance of the following rules is demanded.
4.1.1 Handling regulations

In case of larger audience, a mechanical barrier of the station is required.
It is prohibited to pull off any cables while voltage supply is not deactivated.
Any kind of liquid is to be kept from the installation, at all times.
4.1.2 Operating regulations
The stations are to be operated only from trained personnel. Operation is to ensue
according to operating instructions.
Uncontrolled pressing of the various switches/push-buttons of the control units is to
be omitted / prevented.
No work-piece carriers should to be removed from the system.
4 Operation
4.1 General notes on
operation

Table of Contents

Related product manuals