11
Charger TCL 3
suitable for
–charging Festool battery packs: BP, BPS and
BPC (NiMH, NiCd, li-ion are recognised automat-
ically.)
– indoor use only.
Operation
Changing the battery pack
Removing the battery pack
Press and hold the two buttons
[2-1]
.
Slide the battery pack forwards to remove.
Inserting the battery pack
Slide the battery pack onto the retainer on the
underside of the handle shown in Fig. until it en-
gages.
WARNING
The user bears the responsibility for damage and
accidents caused by improper use; this also in-
cludes damage and wear caused by continuous
use in industry.
To Next Page
Loading...
