To Next PageTo Next PageWhat to do if Festool LHS-E 225 Sander not working and beeps three times when an attempt is made to switch it on?
If your Festool LHS-E 225 is not working and beeps three times when you try to switch it on, the overheating protection may be active. Let the power tool cool down for approximately 15 minutes before switching it back on.
General| Sanding Diameter | 225 mm |
|---|---|
| Dust Extraction | Yes |
| Sanding Pad Diameter | 225 mm |
| Abrasive Diameter | 225 mm |
| Interchangeable Sanding Pad Diameter | 225 mm |
| Sanding Disc Diameter | 225 mm |
| Cable Length | 4 m |
| Vibration Emission Value | 2.5 m/s² |
Read all safety warnings, instructions, illustrations and specifications provided with this power tool.
Covers maintaining a safe work area, proper electrical connections, and precautions against water exposure.
Emphasizes staying alert, using PPE, preventing unintentional starting, and proper attire and footing.
Guidance on proper usage, maintenance, and storage of the power tool to ensure safety and longevity.
Specific safety guidelines for operating the sander, including accessory compatibility and speed limits.
Explains kickbacks and provides safety measures for preventing them, including proper hand positioning and corner work.
Focuses on using correct sanding disc sizes and avoiding oversized discs to prevent injuries.
Addresses hazards from toxic dust, the need for PPE, and fire risks associated with dust and swarf.
Details chemicals in dust causing cancer, birth defects, or reproductive harm, and how to reduce exposure.
Defines the drywall sander's intended applications for sanding primed drywall, removing residue, and cautions against wet sanding.
Lists key specifications including power, speed, pad diameter, tool holder, and weight for the LHS-E 225 EQ.
Identifies key components of the drywall sander with numbered references for easy recognition.
Ensures correct mains voltage and frequency match the machine's specifications to prevent accidents.
Instructions on securely connecting and disconnecting the mains cable to the power tool.
Details the procedure for switching the power tool ON and OFF, including locking the switch.
Recommends using 3-wire grounding cords and provides a table for selecting cable size based on length.
Explains features like smooth start-up, constant speed, overload protection, and overheating protection.
Describes how to regulate the speed steplessly using the adjusting wheel for optimal sanding.
Details how overheating protection is triggered, indicated by beeps, and the procedure to cool down the tool.
Instructions on how to fit and remove sanding pads using the supplied tool, ensuring proper engagement.
Guidance on attaching compatible StickFix sanding discs, ensuring correct alignment for optimal suction.
Explains the function of the removable brush segment for edge sanding and cautions about dust exposure.
Details connecting a mobile dust extractor and recommends using an anti-static hose to reduce electric charge.
Instructions on holding the tool, placing it on the surface, applying pressure, and achieving optimal sanding results.
Guidance on safely setting down the power tool to prevent damage and transporting it in the carry bag.
Emphasizes that motor or gear housing repairs must be done by authorized personnel to prevent accidents.
Warns against using compressed air for cleaning and stresses unplugging the tool before maintenance.
Step-by-step instructions for cleaning air openings and filter sieves to maintain tool performance.
Advises using original Festool sanding pads and lists available accessories like hand grips and dust extractors.
Explains the Systainer system for storage and interlocking, including how to open, lock, and connect them.
Addresses problems like rough surface finish due to paste, deformed pads, or incorrect speed settings.
Provides solutions for insufficient extraction power, including filter cleaning and suction adjustment.
Solutions for excessive material removal caused by high speed, incorrect grit, or improper brush segment use.
Addresses issues like sanding marks, incorrect grit, drying times, and proper tool placement for surface finish.
Solutions for sanding marks caused by angled pad placement or overly coarse abrasive grit.
Addresses tool shutdown due to overheating or power interruption, and solutions like cooling down or checking connections.
