Go to fetco.com for the latest version of all information 2 P141 REV:002 revised 1/2016 ©December 2015
Specifications and Requirements
Water Requirements: Coffee Filter Size:
CBS-2160XTS: 20-75 psig, (138-517kPa) 2 gpm (7.60 lpm) 20” X 8” – standard FETCO # F004
Cold Water Supply Only
18” X 7½” - optional half batch FETCO # F005
Water inlet fitting is a 3/8 inch male flare. Electrical: See electrical configuration chart.
Brew Volume: Temperature, as set by factory:
Full Batch 3 gal. (11.4 lit.) All batches are user configurable
200°F (93°C) inside water tank (at sea level)
Total Brew Cycle—Factory setting: CBS-2162XTS: 6 1/2 Minutes CBS-2161XTS 6 Minutes
Weights and Capacities
Brewer Model
Weight
(empty)
Water tank
Capacity & Weight.
Weight
(filled)
*Dispenser
Weight, ea.
*Dispenser
Filled, ea.
*Total Weight Brewer
& Dispensers, Filled
CBS-2161XTS
88 lbs.
(40kg)
8.7 gal.
(33 l)
72 lbs.
(32.7kg)
160 lbs.
(72.5kg)
18 lbs
(8.2kg)
42.5 lbs
(19.3kg)
202.5 lbs.
(92kg)
CBS-2162XTS
130 lbs.
(59kg)
16.3 gal.
(62 l)
136 lbs.
(62.1kg)
266 lbs.
(120.7kg)
18 lbs.
(8.2kg)
42.5 lbs
(19.3kg)
349 lbs.
(158.3kg) (2 dispensers)
* Based on TPD-30 Series Dispensers
Measurements
Brewer Model Height Width Depth Empty weight Shipping weight
CBS-2161XTS 41 ¼ in. (1048mm)
17
in. (454mm)
22½
in. (57cm) 88 lbs. (40kg) 96 lbs. (44kg)
CBS-2162XTS 41 ¼ in. (1048mm) 32 in. (813mm) 22½ in. (57cm) 130 lbs. (59kg) 140 lbs. (63.6kg)
CBS-2160XTS—3-gallon version Dimensions & Utility Connections Rough-in Drawings
Rou
h-in CBS-2161XTS —Sin
le station version 3-
allon version Drawin
#1201.00025.00
Rough-in CBS-2162XTS—Dual station 3-gallon version Drawing#1201.00024.00
To Next Page
Loading...
