9
GETTING TO KNOW YOUR CAR
fig. 6
P4Q00018
ADJUSTING THE SEAT BELT
HEIGHT
There are two anchoring positions
A and B-fig. 6 for front seat belts on
the door post.
Before driving off for the first time,
adjust the position of the seat belt an-
choring point according to your height
and favourite driving position. If re-
quired, have the anchoring point of
the seat belt adjusted.
USING THE CENTRAL REAR
SEAT BELT
(For versions/markets)
To fasten the seat belt: push the
fastener tongue A-fig. 7 into slot B of
the buckle, until you hear it click.
To unfasten the seat belt: press
button C.
To adjust the belt: slide the web-
bing through D, pulling length E to
tighten and length F to loosen.
IMPORTANT The belt is adjusted
properly when it fits closely across the
hips.
fig. 7
P4Q00037
IMPORTANT Have this operation
performed at a Fiat Dealership only
as it involves passenger safety.
To Next Page
Loading...
