Fiat Capron A461 - Swivel Toilet Operation; Swivel Toilet Flushing; Swivel Toilet Emptying; Fixed Seat Toilet Operation

116 Capron - 04-17 - CAP-0017-01EN
Sanitary fittings
11
Swivel toilet The flushing of the Thetford toilet is fed directly from the water system of the
vehicle. The toilet bowl can be moved into the optimal position.
The operating unit is located close to the toilet bowl.
Flushing:
 Before flushing open the sliding trap of the Thetford toilet. To do this, push
the slide lever (Fig. 110,1) in an anticlockwise direction.
 For flushing, press the blue flush button (Fig. 111,1).
 After flushing close the sliding trap. To do this, push the slide lever in a
clockwise direction.
The indicator lamp (Fig. 111,2) lights up whenever the sewage tank has to be
emptied.
Emptying:
 Turn the slide lever (Fig. 110,1) in a clockwise direction. The sliding trap is
closed. To empty, the sliding trap in the Thetford toilet must be closed.
 Remove and empty the Thetford cassette.
Toilet with fixed seat The flushing of the toilet is fed from the water system of the vehicle.
Flushing:
 Before flushing open the sliding trap of the Thetford toilet. To do this, turn
the slide lever (Fig. 112,1) in an anticlockwise direction.
 For flushing, press the blue flush button (Fig. 112,3).
 After flushing close the sliding trap. To do this turn the slide lever
(Fig. 112,1) in a clockwise direction.
The indicator lamp (Fig. 112,2) lights up whenever the Thetford cassette has
to be emptied.
Fig. 110 Thetford toilet bowl (swivelling) Fig. 111 Flush button/indicator lamp
(Thetford toilet)
Fig. 112 Operating unit Thetford toilet