171
STARTING
AND DRIVING
IN AN
EMERGENCY
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
WARNING
LIGHTS AND
MESSAGES
MAINTENANCE
AND CARE
ENGINE COOLANT fig. 11-12
The coolant level must be checked when
the engine is cold and must be between
the MIN and MAX lines on the vessel.
If the level is so, slowly pour a mixture of
demineralised water and FL Selenia PA-
RAFLU UP in a 50-50 proportion.
A 50-50 mixture of PARAFLU UP and
distilled water gives freeze protection to
–35°C.
When the vehicle is used under particu-
larly harsh climate conditions, we recom-
mend using a 60% mixture of PARAFLU
UP and 40% demineralised water.
IMPORTANT Do not remove the cap
from the vessel when the engine is very
hot: risk of burns.
fig. 11 - versioni 1.2 16V, 1.4 8V
where provided, 1.4 16V
F0H0210m
fig. 12 - versioni 1.3 Multijet,
1.6 Multijet
F0H0211m
PARAFLU UP antifreeze is
used in the engine cooling sy-
stem. Use fluid of the same type con-
tained in the cooling system for top-
ups. PARAFLU UP may not be mixed
with other types of fluids. If this ac-
cidentally occurs, do not start the en-
gine and contact a Fiat Dealership.
WARNING
The cooling system is pres-
surised. If required, replace
the cap with an original spare part so
as not to compromise system effi-
ciency.
WARNING
WINDSCREEN / REAR WINDOW
/ HEADLIGHT WASHER LIQUID
To add fluid, lift the cap A-fig. 13 and
pour in a mixture of water and TUTELA
PROFESSIONAL SC 35 fluid in the fol-
lowing proportions:
❒
30% of TUTELA PROFESSIO-
NAL SC 35 and 70% water in sum-
mer.
❒
50% of TUTELA PROFESSIO-
NAL SC 35 and 50% water in win-
ter.
At temperature lower than –20°C use
TUTELA PROFESSIONAL SC 35
neat.
Check level through the reservoir.
To Next Page
Loading...
