21
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND CONTROLS
CONTROL BUTTONS fig. 27
+
To scroll the menu and the next op-
tions or to increase the displayed val-
ue.
MODE Press briefly to access the menu
and/or go to next screen or to
confirm the required menu op-
tion.
Hold pressed to go back to the
standard screen.
–
To scroll the menu and the previous
options or to decrease the displayed
value.
Note Buttons + and – activate different
functions according to the following situ-
ations.
Setting the buzzer volume
To set the desired volume, proceed as fol-
lows:
❒
repeatedly press MODE to display
“bUZZ“;
❒
press + to increase the volume;
❒
press –to decrease the volume;
❒
Hold button MODE pressed for
longer than two seconds to confirm
the change made.
Setting the speed limit
A speed limit can be set and the system
will inform the drive when the limit is ex-
ceeded by means of an indication on the
display and the buzzer. Proceed as follows
to set:
This function is “OFF“ when the car is
delivered.
SET-UP MENU
The “Set-up Menu” is used for the fol-
lowing adjustments and/or settings:
❒
SETTING THE CLOCK
❒
SETTING THE BUZZER VOLUME
❒
SETTING THE SPEED LIMIT
❒
SETTING THE UNIT OF MEASURE-
MENT.
Setting the clock
The clock is set to 24 hours when the car
is delivered.
Proceed as follows to set the required
time:
❒
repeatedly press MODE to display
“Hour”;
❒
press + to increase one minute;
❒
press – to decrease one minute;
Hold buttons + or – pressed for a few
seconds to run the clock forwards or
backwards rapidly until the buttons are re-
leased.
❒
Hold button MODE pressed for
longer than two seconds to confirm
the change made to the time.
fig. 27
F0H0736m