22
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICAL
SPECIFICATIONS
ALPHABETICAL
INDEX
DASHBOARD
AND CONTROLS
Setting the unit of measurement
Proceed as follows to set the required unit
of measurement (kilometres or miles):
❒
repeatedly press MODE to dis-
play“Unit”;
❒
press button + or – to change the unit
of measurement;
❒
to confirm the setting, hold button
MODE pressed for longer than two
seconds.
Fuel inertia
switch tripped indication
The indication appears automatically if the
fuel inertia switch trips follow a collision
of considerable severity.
The switch cuts off fuel feed.
See the “Fuel inertia switch” chapter for
more information.
Proceed as follows to select:
❒
repeatedly press MODE to display
“SPEEd“;
❒
press + to increase the value corre-
sponding to speed (the maximum lim-
it is 250 km/h);
❒
press – to decrease the value corre-
sponding to speed (the limit is 30
km/h under which it switches to
“OFF”);
❒
to confirm the setting, hold button
MODE pressed for longer than two
seconds.
If after the “FPSon” message
appears, you smell fuel or
see leaks from the fuel system, do not
reset the switch to avoid fine risk.
WARNING
To Next Page
Loading...
