TECHNICAL SPECIFICATIONS
222
STEERING
Energy-absorbing jointed steering
wheel.
Jointed steering column with angle
and longitudinal adjustment system.
Rack and pinion with hydraulic pow-
er steering.
Minimum steering circle between
pavements: 11.60 m.
WHEELS
RIMS AND TYRES
Steel or alloy rims on request.
Tubeless tyres with radial carcass.
Standard size spare wheel with steel
rim.
The homologated tyres are listed in
the log book.
IMPORTANT In the event of dis-
crepancies between the information
provided in this Owner Handbook and
the Log Book, consider the specifica-
tions shown in the Log Book only.
To ensure safety of the car in move-
ment, it must be fitted with tyres of
specified size and of the same brand
and type on all wheels.
IMPORTANT Do not use inner
tubes with tubeless tyres.
WHEEL GEOMETRY
Front wheel toe-in measured from
rim to rim with vehicle empty:
– toe-in: 2 mm.
To Next Page
Loading...
