FIBARO FGWP-102 - Description and Features of FIBARO Wall Plug

3
DESCRIPTION AND FEATURES
Main features of FIBARO Wall Plug:
• Compatible with any Z-Wave or Z-Wave+ Controller.
• Supports protected mode (Z-Wave network security mode) with
AES-128 encryption.
• Extremely easy installation - simply plug the device into the mains
socket.
• Works as a Z-Wave signal repeater.
• Active power and energy consumption metering.
• Current value of the load and operating mode are indicated by the
multi-colour LED ring.
FIBARO Wall Plug is a universal, Z-Wave Plus compatible, remotely
controlled outlet adapter. This device may be applied wherever you
want to control electrical devices with up to 2500W load.
The Wall Plug is equipped with a power and energy metering
function. It uses a LED ring to visualize the current load with colour
changing illumination and operating mode. This is the smallest and
most attractive device of this type available in the world.
The Wall Plug may be operated using the B-button located on its
casing or via any Z-Wave compatible controller.
#1: Description and features
FIBARO Wall Plug is a fully
compatible Z-Wave PLUS device.
NOTE
This device may be
used with all de-
vices certied with
the Z-Wave Plus cer-
ticate and should be
compatible with such
devices produced by
other manufacturers.
i
NOTE
FIBARO Wall Plug is
a Security Enabled
Z-Wave Plus product
and a Security Ena-
bled Z-Wave Control-
ler must be used in or-
der to fully utilize the
product.
i