EasyManua.ls Logo

Fidelity Electronics FM180S - 4 Getting Started; Built-In Rechargeable Battery; Power Adaptor; About DC Input Connector

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
4. Getting Started
In order to obtain an accurate weighing result, the weighing platform,
(hereinafter referred as platform) must be placed on a strong and level
surface. Avoid using the platform and this instrument (hereinafter
collectively referred as scale) in environment where excessive wind flow,
vibration and extreme temperature change exist
Cautions: -
The instrument is not an explosion proof device.
The instrument is not a water proof device.
Do not open the instrument, no user serviceable parts inside. Always
contact your dealer for service.
Do not place this instrument in where shock, excessive vibration or
extremes of temperature (before or after installation) exist.
4.1 Built-In Rechargeable Battery
The instrument is equipped with a built-in rechargeable battery. Before first
time use, recharge it for at least 8 hours to ensure the best battery
performance.
4.2 Power Adaptor
One universal voltage power adaptor with 4 power plugs are supplied with
this instrument. Select the suitable power plug and slide it into the power
adaptor very carefully until a "click" sound comes out.
4.3 About DC Input Connector
The DC input connector and the output plugs of the power adaptor both
comes with a cover. Always screw tightly the cover to the DC input connector
when not used and battery recharge is in process.
4.4 About Blinder Covers
For maximum penetration protection, there are 3 removable nickel plated
brass blinder covers are located at the back housing. Do not remove or make
loosen any of these covers unless the covered position has to be used.
Contact your dealer for more information and connection information.

Table of Contents