Fidelity Electronics FM180S - For 2 (Label Format Group 2); Label Programming

32
9.1.2 For 2 (Label Format Group 2)
For 2 (format group 2) is for totalized data printing (after MR is pressed and
memory recall is in effect).
In order to trigger the right label to be printed, label files stored in printer for
this format group 1 must have a file name of BB1.dlb, BB2.dlb, BB3.dlb,
BB4.dlb and BB5.dlb.
In this instrument, 5 printout selections are available in format group 2: -
• For 2 1: - Select this to print label file BB1.dlb stored in printer.
• For 2 2: - Select this to print label file BB2.dlb stored in printer.
• For 2 3: - Select this to print label file BB3.dlb stored in printer.
• For 2 4: - Select this to print label file BB4.dlb stored in printer.
• For 2 5: - Select this to print label file BB5.dlb stored in printer.
9.2 Label Programming
Prompt commands, information description, working mode and suggested
length on label are listed on the below table.
Caution: - Do not combine information of different working mode on the same
label.
For other programming details, refer to user manual of printer and label
editing software.