Fidelity Electronics FM180S - Key Function During Internal Function Mode; Internal Function Table

To Next Page

To Previous Page

a. Power this instrument off and then power on again,

b. Press [Tare] during countdown,

c. Displays F1,

d. This instrument is now in internal function.

5.3 Key Function During Internal Function Mode

Key

Function in Setup & Calibration

[On/Off]

Quit without saving and power off

[Zero]

Quit without saving

[Tare]

Go to internal function during power on countdown or set

F1 value being shown to zero and to display the net span

gain by applying additional load applied.

[Func]

• Goto next page.

• Move cursor to one place right

[Unit]

• Goto previous page.

• Move cursor to one place left

[Print]

Enter, save and return

[MR]

Clear

[M+]

Increase numeric number by 1

5.4 Internal Function Table

Refer to the below table for internal function number, parameter and setting

notes.