Fidelity Electronics FM180S - Appendix A: - Bi-Directional Communication Commands

38
Appendix A: - Bi-Directional Communication Commands
Direct Control commands and information request commands can be sent to
this instrument through any standard communication programs like Hyper
Terminal, which comes with most of the Windows operating system in
computer.
A. Direct Control Commands
32
(F18 = Mode 1 or 2)
Equivalent direct control commands for each of the key on panel from
computer are shown below.
Note: -
There is no direct control command to simulate the ON/OFF key on panel.
Thus, power on and off this instrument must be done through the ON/OFF
key on panel.
32
Direct Control Commands to be transmitted to this instrument are not case sensitive.