Fiessler AKAS-3PM - Page 44

44
FIESSLER
E L E K T R O N I K
AKAS3P M/F
Normal stroke from 11mm >=TDC > 8mm above clamping point with max. machine overrun
of 5mm.
Status Stop
FP
pressed
slow closing slow
closing
slow
closing
Bending speed
Safety PLC
OUT
FUO 0/1 1/0 1/0 1/0 1/0 1/0
FUS 0/0 1/1 1/1 1/1 1/1 1/1
SGO 0/X 0/X 1/0 1/0 1/0 1/0
SGS 0 0/0 1/1 1/1 1/1 1/1
NC out
SP 0 0 0 1 1 1
Manual
signal OUT
KAST 0 0 0 0 0 0
AKAS OUT
OSSD1 0 0 1 1 1 1
OSSD2 0 0 1 1 1 1
SGA 1 0 0 0 0 0
HUSP 0 0 0 0 0 0
Receivers
E5 inactive active 1 blanked blanked blanked blanked
E6 inactive active 1 blanked blanked blanked blanked
E3 inactive active 1 blanked blanked blanked blanked
E4 inactive active 1 blanked blanked blanked blanked
E1 inactive active 1 blanked blanked blanked blanked
E2 inactive active 0 blanked blanked blanked blanked
0/1 = AKAS 3PM = 0 / AKAS 3PF = 1
aktive 1 means receiver is active and has to be free
aktive 0 means receiver is active and has to be interrupted
Speed
10mm/s
<11mm
TDC
8 mm 0 mm
clamping
-x mm
BDC
4mm
Stroke
Doku Nr. 1379 Stand 27.1.2017 /Aui
I/O signals depending on time, moving distance and movementspeed
8