15
MENUS
Press the MENU key and then use the UP and DOWN arrow keys to scroll through the menus. Press
the OK button to select the setting:
FILTER CHECK SETTING
See the FILTER CHECK Feature in Filter Replacement Instructions.
NEW APPLICATION CALIBRATION SETTING
! This will initiate the Calibration sequence. Avoid doing this unnecessarily. This should only be
used if you are changing lasers, length of hose, diameter of hose; anything that would change
(reduce or increase) the airflow restrictions in the entire system.
SERVICE MENU SETTING
This menu is only to be used by Filtrabox Technicians or with the guidance of a Filtrabox
Technician.
To Next Page
Loading...