6
ASSEMBLY INSTRUCTIONS
UNPACKING
! Useful Tip: The Filtrabox is shipped in custom packaging for maximum
protection during transport. Consider keeping the packaging should you wish to
ship the product again.
! Attention: The OXY-Carbon Gas Filter is HEAVY. This filter weighs
approximately 20lbs. Take appropriate care and precaution when lifting the
filter.
Remove all the packaging and place all the parts on the floor. Take inventory of the parts included with
your kit:
BOX 1:
1. Filtrabox Micro Fume Extractor with Pre-Installed Filters:
a. Dust Pre-Filter
b. Dust HEPA Filter
c. OXY-Carbon Gas Filter
2. User Manual and Quick Start Guide
3. Screws and Tool for Threaded Inlet
BOX 2:
1. Power Cord
2. Threaded Inlet
3. Flex Hose 4” with Hose Clamp
a. Specific hose adapters may also be provided
The Filtrabox Micro is packaged without the Threaded Inlet to protect it in shipping. Follow the
Installation Instructions on the next page to get started.
To Next Page
Loading...
