finmon mi64 - 7 Disarming the System

the business that is usually armed in Home1.
How
 Hold down the [ALT] key.
 Touch [9].
 Touch the number of the [ZONE] to be bypassed.
 Touch [*] .
Step-by-step
 Touch [#] to clear any key entries.
 Make sure you have selected the home profile or
partition that you want to bypass a zone in. Do this
by touching the [HOME1/2] key or the relevant [P]
key. The profile you are editing will be brightly
illuminated green.
 Hold down the [ALT] key until you hear a long
beep.
 Touch the [9] key, you will hear a beep.
 Touch the number of the [ZONE] you want to
bypass.
 Touch [*] to save. The zone indicator will have
turned red.
 To un-bypass a zone. Select the [ZONE] you want to
change.
 The zone indicator will have extinguished.
 Touch [*] to save.
 Touch [#] to exit and return to normal keypad
functions.
Note This can only be done by users who have been assigned a
Master Code. Remember, if you are bypassing a zone often
due to a fault or issue, ensure it is fixed to allow your
system to function correctly.
7 Disarming the System
When You have returned to your home or business and the
system has been armed.
How
 Touch the [#] key.
 Enter a valid [USER CODE].