Troubleshooting
In this section we have given some advice for standard problems that you may
encounter. If you cannot find a solution here, please contact your installer or
monitoring company.
12.1 Fault Conditions
If a fault condition occurs your power indicator will turn red. You can view the
fault, and depending on the type can resolve it yourself or contact your
installer/monitoring company.
When Your power indicator is flashing and you want to know
what the fault is.
How
Touch [ALT] then [7].
An illuminated zone indicator/s will indicate the
fault condition/s.
Refer to 12.1.1 to see what fault has occurred.
12.1.1 Fault Indicators and what to do
Zone
Status
Indicator
Fault Conditions Suggested Action
1 Siren Tamper Contact your installer.
2 Auxiliary 12V
Tamper
Contact your installer.
3 Box Tamper Contact your installer.
4 AC Loss Check that plug for the AC is in place
and turned on. If it is, and the fault is not
cleared- contact your installer.
5 Communication
Fail
Contact your installer.
6 Low Battery Check that the plug for the mi64 is in
place and turned on.
If it is, and the fault is not cleared-
contact your installer.
7 Device Tamper Contact your installer.
8 Device Loss Contact your installer.
9 Network Trouble Contact your installer.
27
Mi64 2017
To Next Page
Loading...