finmon mi64 - 12 Chime Zones

12 Chime Zones
When a chime zone is violated, the keypad will sound a ‘beep’. This happens
when the partition that zone belongs to is not armed.
When You want to make a zone a chime zone.
For example, you may want to make the front door a chime
zone so that you are alerted each time it is opened.
How
 Touch [ALT].
 Touch [2].
 Enter [ZONE NUMBER] to assign/un-assign as
Chime Zone.
 Touch [*].
Step by Step
 Ensure the keypad is displaying the appropriate
partition.
 Touch [ALT] and then [2].
 Enter the [ZONE NUMBER] corresponding to the
zone to programmed as a chime zone
 Then [*].
 The zone indicator will illuminate.
 A chime zone may be cleared in the same way, enter
the zone number then [*].
 Touch [#] to exit the mode.
Note You can only add/edit the chime zones from a keypad that
is assigned to the partition that you want to edit.