finmon mi64 - 9.2 Fire Alarm; 9.3 Medical Alarm; 9.4 Duress Code

When There is a fire situation and you require help from your
monitoring company’s response team.
How
 Hold down the [FIRE] key.
Step-by-step
 Hold down the [FIRE] key on the keypad. A fire
alarm will have activated and reported to your
monitoring company.
 A fire alarm can also be trigged by smoke or heat
sensors that have been installed and connected to the
system.
 The siren will sound and the keypad will beep
continuously.
 You can silence the siren by entering a valid [USER
CODE].
Note Having heat and smoke detectors will not prevent fires.
Please take precautions.
Touch this key only when a FIRE RESPONSE is
required.
9.3 Medical Alarm
When There is an emergency medical situation and you require
help from your monitoring company’s response team.
How
 Hold down the [MEDICAL] key.
Step-by-step
 Hold down the [MEDICAL] key on the keypad. A
medical alarm will be activated and been reported to
your monitoring company.
 The keypad will sound a long beep to how that the
medical alarm has been activated.
Note Touch this key only when a MEDICAL RESPONSE is
required.
9.4 Duress Code
When This should be used in the situation when an intruder
forces you to disarm the panel under ‘duress’.
How
 Touch the [#] key.
 Enter the [DURESS CODE].
Step-by-step
 Touch the [#] key to wake up the system and clear
19
Mi64 2017