How to lay Vermiculite
• In order to access the burner, it is necessary to first remove the glass.
• Follow the ‘Glass removal process’ in this guide.
• Lift glass away from the appliance and lay flat in a safe place with insulating material facing down.
• Beginning in the middle at the back of the burner,
carefully empty the bags of vermiculite into the
burner tray.
• Ensure not to spill any vermiculite in cavities
in front of and behind burner tray.
• Do not pour vermiculite directly into burner slots.
• Fill area behind burner up to top of burner tray.
Use hand to spread out and push under burner.
• Fill up area in front of burner and gently pat
down vermiculite to ensure it is spread evenly
throughout the burner tray.
• Using a small Allen key (or similar), remove any
vermiculite that may have fallen into burner slots.
• Vermiculite layer complete.
To Next Page
Loading...