4
INTRODUCTION
IMPORTANT: If you are installing this product for
use by others, you must leave this manual (or a copy
of it) for the end user.
Wi-Safe 2 technology enables wireless interlinking
between Wi-Safe 2 products.
The Strobe and Vibrating Pad, when interlinked with
Wi-Safe 2 smoke, heat and/or carbon monoxide (CO)
alarms will provide warning of danger from smoke
and/or carbon monoxide.
In addition to the audible sound from your smoke,
heat or CO alarm, the flashing Strobe and Vibrating
Pad will be triggered to alert those who may not be
able to hear the audible alarm. The flashing strobe
provides a visual warning for waking hours, while
the vibrating pad is designed to be placed under a
pillow or a mattress and is suitable for waking an
individual to alert them when an alarm sounds. If
placed under a mattress, ensure the thickness of the
mattress does not cushion the pad to the extent it
cannot be felt adequately.
KEY FEATURES
• Wi-Safe 2 products can be interlinked to create
a network, meaning if smoke or CO triggers any
alarm in the network, all other networked alarms
and ancillary devices activate.
• When used with Wi-Safe 2 enabled smoke, heat
and/or CO alarms, the kit provides additional
protection when sound alone may not be enough.
• Provides a simple two button “learn in” process to
wirelessly interlink with Wi-Safe 2 smoke, heat or
CO alarms.
• The Strobe provides a remote low level testing
facility for testing interlinked smoke and CO
To Next Page
Loading...
