FireAngel SO-601 - User Manual

Questions and Answers

J
Jesse NelsonAug 7, 2025
What to do if my FireAngel SO-601 Smoke Alarm activates when no smoke is visible?
- A
  Anthony SheltonAug 8, 2025
  If your FireAngel smoke alarm activates even when there's no visible smoke, several factors could be at play. First, ensure the battery is correctly fitted and, if it's been in use for over 12 months, replace it. For SI-601 models, try wiping the alarm with a slightly damp cloth to eliminate static electricity. It's also advisable to verify the alarm's placement and clean it as described in the ‘Positioning’ and ‘Routine Maintenance’ sections, respectively.
S
sandra33Aug 13, 2025
What to do if I experience frequent unwanted alarms with my FireAngel SO-601 Smoke Alarm?
- J
  Jesse LeeAug 13, 2025
  If you are experiencing frequent unwanted alarms with your FireAngel smoke alarm, begin by checking its location. Also, cleaning the smoke alarm may resolve the issue. For SI-601 models, wiping the alarm with a slightly damp cloth can help remove any static electricity buildup. If the issue persists, contact technical support for further assistance.
J
Julie OchoaAug 20, 2025
How to stop my FireAngel SO-601 from alarming when connecting the battery?
- G
  Gerald PriceAug 20, 2025
  If your FireAngel smoke alarm goes into alarm when you first connect the battery, it could be due to static. To resolve this, wipe the front cover with a slightly damp cloth to remove any static that may have transferred to the alarm during handling.
A
Amy ChandlerAug 26, 2025
Why does my FireAngel SO-601 Smoke Alarm chirp intermittently?
- C
  Chris JordanAug 26, 2025
  If your FireAngel smoke alarm is chirping intermittently, there are a few things you can try. First, make sure the chirping is actually coming from your smoke alarm and not another alarm (like a carbon monoxide or burglar alarm). If it is the smoke alarm, try replacing the battery. If the battery is new and the chirping continues, it is advisable to contact technical support. You may also want to check the location of your smoke alarm.
H
Holly NortonSep 1, 2025
Why doesn't my FireAngel SO-601 Smoke Alarm sound during testing?
- C
  Curtis HarrisSep 1, 2025
  If your FireAngel smoke alarm doesn't sound during testing, ensure you are pressing the test button firmly. If the unit has been silenced and is in low sensitivity mode, it may not test; wait 15 minutes and try again. If it still fails, replace the battery. If the problem continues after replacing the battery, contact technical support.

Summary

INTRODUCTION

SENSOR TECHNOLOGY

Explains the two types of smoke alarm sensors used in SI-601 and SO-601 models.

APPLICATION

Multi-family and Mixed Occupant Residence

Details suitability for flats, bedsits, and family residences with primary detection systems.

Institutions and Hotels

Covers use in motels, hospitals, and dormitories, emphasizing primary detection system requirements.

Mobile Homes and Caravans

States suitability for mobile homes and caravans.

Commercial and Industrial Premises

Clarifies that the alarm is not intended for commercial or industrial applications.

POSITIONING

Ionisation Type Smoke Alarms

Details effective placement for ionisation alarms detecting fast, flaming fires.

Optical (Toast Proof) Smoke Alarms

Explains placement for optical alarms, less sensitive to cooking fumes.

Recommended Locations to Avoid

Lists unsuitable locations like bathrooms, kitchens, dusty areas, and extreme temperatures.

BEST LOCATION (IN CENTRE OF CEILING)

Illustrates the ideal placement for smoke alarms in the center of a ceiling.

LIMITATIONS OF MY SMOKE ALARM

General Functional Limitations

Explains that alarms only detect smoke that reaches them and may not work if not optimally positioned.

Operational Constraints and Lifespan

Highlights battery needs, product lifespan, testing, and replacement requirements.

HOW TO INSTALL YOUR SMOKE ALARM

Preparation

Covers attaching the mounting plate and marking drill holes, ensuring correct orientation.

Install Mounting Plate

Securing the mounting plate to the ceiling or wall using provided screws.

Install 9 V Battery

Inserting the 9V battery correctly, noting the LED flash pattern indicating activation.

Fit Your FireAngel Smoke Alarm

Locking the smoke alarm onto the mounting plate by aligning and turning clockwise.

Test Your FireAngel Smoke Alarm

Directs users to the 'Alarm Test' section for verification after installation.

OPERATION

Normal and Low Battery Conditions

Explains the LED indicators for normal operation and the low battery warning chirp.

BATTERY REPLACEMENT

Steps for Battery Replacement

Outlines the process of removing the alarm, replacing the battery, and re-fitting the alarm.

ALARM TEST

Performing the Test

Instructs to press the test button to verify the alarm's functionality and sound output.

Test Button Accuracy and Frequency

Clarifies test button accuracy and recommends weekly testing for optimal safety.

ALARM SMART SILENCE

How to Use Smart Silence

Explains how to temporarily silence nuisance alarms caused by cooking fumes or steam.

Silence Cycle and Auto-Reset

Describes the reduced sensitivity period and the automatic return to full sensitivity.

ROUTINE MAINTENANCE

Testing and Cleaning

Details weekly testing and quarterly cleaning using a vacuum cleaner with a soft brush attachment.

WHAT TO DO IN CASE OF A FIRE IN YOUR HOME

Family Escape Plan and Rules

Emphasizes creating and practicing a family escape plan, staying calm, and following escape routes.

REPAIR

Repair Policy and Support

States that repairs are not permitted and directs users to troubleshooting or technical support.

TROUBLESHOOTING

Static Interference and Testing Issues

Addresses alarms activating on first connection and test failures due to static or battery wrapper.

Chirping and False Alarms

Solutions for intermittent chirping, false alarms, and activation without visible smoke.

Alarm Not Sounding During Testing

Provides steps to resolve issues where the alarm does not sound during testing.

DISPOSAL

Disposal and Recycling

Advises against opening or burning the unit and suggests recycling options.

HOW TO MAKE YOUR HOME SAFER

Fire Safety Program Essentials

Covers installing alarms, keeping them clean, testing weekly, and replacing faulty units.

Preventing Fires and Hazardous Situations

Lists actions like proper smoking, storing flammables, maintaining electricals, and cleaning cookers.

Family Escape Planning

Details developing and practicing escape plans, including child education and meeting points.

WARRANTY

Warranty Terms and Conditions

Outlines the 5-year warranty for defects and exclusions like misuse or lack of maintenance.

RETURNS

Return Procedure and Contact

Provides contact information for technical support and the process for returning products for testing.

PRODUCT RANGE

FireAngel Product Offerings

Mentions other home safety products manufactured by FireAngel Ltd. and their website.

FireAngel SO-601 Specifications

General

Type	Optical Smoke Alarm
Sensor Type	Optical
Test Button	Yes
LED Indicator	Yes
Alarm Volume	85dB
Operating Temperature	0 to 40 °C
Standards	EN 14604
Features	Hush button