EasyManua.ls Logo

FireAngel SI-601 - User Manual

FireAngel SI-601
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SI-601 / SO-601
User Manual
Smoke Alarm
Standard / Toast Proof with Smart
Silence

Table of Contents

Questions and Answers

  • A
    Andrew WallJul 31, 2025
    What to do if my FireAngel SI-601 Smoke Alarm activates when no smoke is visible?
    • D
      Diana HernandezJul 31, 2025
      If your FireAngel smoke alarm activates even when there's no visible smoke, several factors could be at play. First, ensure the battery is correctly fitted and, if it's been in use for over 12 months, replace it. For SI-601 models, try wiping the alarm with a slightly damp cloth to eliminate static electricity. It's also advisable to verify the alarm's placement and clean it as described in the ‘Positioning’ and ‘Routine Maintenance’ sections, respectively.
  • J
    Joshua SmithAug 7, 2025
    What to do if I experience frequent unwanted alarms with my FireAngel Smoke Alarm?
    • B
      Benjamin StanleyAug 7, 2025
      If you are experiencing frequent unwanted alarms with your FireAngel smoke alarm, begin by checking its location. Also, cleaning the smoke alarm may resolve the issue. For SI-601 models, wiping the alarm with a slightly damp cloth can help remove any static electricity buildup. If the issue persists, contact technical support for further assistance.
  • E
    Eric ParkerAug 12, 2025
    How to stop my FireAngel SI-601 Smoke Alarm from alarming when connecting the battery?
    • B
      Bonnie RamosAug 13, 2025
      If your FireAngel smoke alarm goes into alarm when you first connect the battery, it could be due to static. To resolve this, wipe the front cover with a slightly damp cloth to remove any static that may have transferred to the alarm during handling.
  • D
    denisemendezAug 18, 2025
    Why does my FireAngel SI-601 chirp intermittently?
    • R
      Richard SalasAug 18, 2025
      If your FireAngel smoke alarm is chirping intermittently, there are a few things you can try. First, make sure the chirping is actually coming from your smoke alarm and not another alarm (like a carbon monoxide or burglar alarm). If it is the smoke alarm, try replacing the battery. If the battery is new and the chirping continues, it is advisable to contact technical support. You may also want to check the location of your smoke alarm.
  • M
    Michael MorrisAug 25, 2025
    Why doesn't my FireAngel Smoke Alarm sound during testing?
    • R
      reyesjoshuaAug 26, 2025
      If your FireAngel smoke alarm doesn't sound during testing, ensure you are pressing the test button firmly. If the unit has been silenced and is in low sensitivity mode, it may not test; wait 15 minutes and try again. If it still fails, replace the battery. If the problem continues after replacing the battery, contact technical support.

Summary

Application

Positioning

How to Install Your Smoke Alarm

Installation: Preparation

Attaching the mounting plate to a ceiling or wall and marking drill holes.

Install Mounting Plate

Install 9 V Battery

Fit Your FireAngel Smoke Alarm

Test Your FireAngel Smoke Alarm

Battery Replacement

Alarm Test

Alarm Test: Press Test Button

The action of pressing the central test button.

Alarm Test: Loud Alarm Sound

Describes the audible alarm sound during the test.

Alarm Test: Rapid LED Flash

Describes the visual LED indicator during the test.

Alarm Smart Silence

Smart Silence: Press Silence Button

Smart Silence: Reduced Sensitivity Cycle

Smart Silence: Rapid LED During Cycle

Smart Silence: Return to Full Sensitivity

Routine Maintenance

What to Do in Case of a Fire in Your Home

Troubleshooting

Troubleshooting: False Alarm on Battery Connect

Addresses false alarms upon initial battery connection.

Troubleshooting: Test Button Failure

Troubleshooting: Intermittent Chirping

Troubleshooting: False Activation

Troubleshooting: Frequent Unwanted Alarms

Troubleshooting: No Sound During Test

How to Make Your Home Safer

Home Safety: Good Fire Safety Program

Home Safety: Rules & Hazard Prevention

Home Safety: Recognize Alarm Signal

Home Safety: Educate Children on Alarms

Home Safety: Establish Meeting Place

Home Safety: Conduct Fire Drills

Warranty

FireAngel SI-601 Specifications

General IconGeneral
Battery LifeUp to 10 years
Alarm Sound Level85dB at 3 meters
Test ButtonYes
LED IndicatorYes
Warranty10 years
TypeSmoke Alarm
Power SourceBattery
Weight200 g
Standards ComplianceEN 14604:2005
Operating Temperature0°C to 40°C

Related product manuals