To Next PageTo Next Page
Need help?Do you have a question about the FireAngel Thermoptek ST-622-T and is the answer not in the manual?
Explains the 10-year lithium power pack and its activation on base plate connection.
Details the optical sensing and thermal enhancement for faster fire detection.
Discusses requirements for installing the smoke alarm in new build properties.
Instructions for preparing the base plate, drilling holes, and inserting anchors.
Describes the red LED flashing every 40 seconds indicating the alarm is active.
Explains the chirp warning for low battery and recommended actions.
Describes the feature to temporarily silence the low battery chirp for 8 hours.
Recommends testing the smoke alarm weekly and reporting failures.
Provides instructions for cleaning the smoke alarm every 3 months.
Solutions for when the alarm fails to sound during tests.
Solutions for intermittent chirping issues.
Solutions for false alarms.
Solutions for the low battery warning silence feature not working.
Solutions for recurring false alarms.
General| Type | Smoke Alarm |
|---|---|
| Battery Life | 10 years |
| Alarm Volume | 85 dB at 3 meters |
| Test Button | Yes |
| Warranty | 10 years |
| Interconnectability | No |
| Hush Mode | Yes |
| Operating Temperature | 0°C to +40°C |
| Sensor Technology | Thermoptek |
| Power Source | 3V Lithium Battery (Sealed) |
| LED Indicator | Yes |
| Standards Compliance | BS EN 14604:2005 |
