To Next Page
S
Stephanie HopkinsJul 31, 2025
What to do if my FireAngel SI-610 activates when no smoke is visible?
- JJeffrey DoughertyJul 31, 2025
If your FireAngel smoke alarm goes off when there's no visible smoke, first check its location to ensure it's suitable based on positioning guidelines. Clean the smoke alarm, referring to the routine maintenance instructions. For the SI-610 model, wipe the alarm with a slightly damp cloth to remove any static electricity build-up. If frequent unwanted alarms persist, it's recommended to contact technical support for further assistance.
General
