EasyManua.ls Logo

FireAngel ST-230 - User Manual

FireAngel ST-230
20 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User Manual
Mains Operated Thermoptek Smoke Alarm
Mains Operated Heat Alarm
Mains Operated Thermoptek Smoke Alarm with Wi-Safe 2
Mains Operated Heat Alarm with Wi-Safe 2
ST-230 / HT-230 / WST-230 / WHT-230
Drawing No: GN5562
Revision: 1
Drawn By: D4
Tschaka RM, May 2019
FireAngel Safety Technology Limited. Artwork Information
Ensure that you are printing / manufacturing from the original artwork file and not a preview
CONFIDENTIAL: The information provided in this document is proprietary to FireAngel Safety Technology Limited and
as such should only be used/shared for the exclusive manufacture of those products specified.
Title/Description:
User Manual
Material:
Refer to MS0032
Used On / Used For:
Generic FA Pro heat / smoke
Size:
W - 121mm / H - 129mm
Supplier:
FLEX
Print Colours:
BLACK
Content Quality:
Chris CB
Product Information:
Greg B
Certication marks:
Ian B
APPROVAL:
Messaging: Messaging:
Chris D
TEST YOUR ALARM WEEKLY

Table of Contents

Questions and Answers

  • U
    ubrownAug 9, 2025
    Why does my FireAngel ST-230 Smoke Alarm keep chirping?
    • A
      Amanda ButlerAug 9, 2025
      Your FireAngel Smoke Alarm might be chirping due to a low battery. If the alarm chirps approximately every 45 seconds and the amber LED is flashing, it indicates a low battery, and the unit should be replaced within 30 days. Alternatively, if the alarm chirps once every 4 hours, it means another alarm in the network has a low battery. Find and replace that alarm as soon as possible, and definitely within 30 days.
  • J
    Jonathan MoralesAug 14, 2025
    What to do if the amber LED is flashing and my FireAngel ST-230 Smoke Alarm is chirping?
    • C
      Christopher OlsonAug 14, 2025
      If the amber LED is flashing at the same time as the chirping sound, it means that the battery is low and your FireAngel Smoke Alarm should be replaced as soon as possible. If the amber LED is flashing at a different time than the chirping sound, this indicates a fault and the alarm should be replaced as soon as possible. If the amber LED is double flashing along with the chirping, it indicates the wireless module has a low battery or is faulty, and the alarm should be replaced as soon as possible.
  • M
    Molly MathewsAug 19, 2025
    Why won't other interlinked FireAngel ST-230 units silence when one is silenced?
    • M
      Michael GonzalezAug 19, 2025
      If interlinked FireAngel Smoke Alarm units have sensed smoke or heat, they can’t be silenced remotely. If one or more units remain in alarm, all other interlinked units will emit their audible warning again within 4 minutes. Vacate the property if there is a fire hazard.
  • I
    ikramerAug 25, 2025
    What to do if my FireAngel ST-230 Smoke Alarm doesn't sound during testing?
    • M
      Matthew RodriguezAug 25, 2025
      First, make sure you push the center of the test button firmly. If you are 'learning-in' the alarm and it doesn't test, repeat the process. If it still fails, contact Technical Support.
  • J
    John JonesAug 29, 2025
    How to fix a FireAngel Smoke Alarm when the green LED doesn't illuminate with mains power on?
    • S
      Sarah ThorntonAug 30, 2025
      First, ensure the FireAngel Smoke Alarm is correctly located on the base plate and that the mains power supply is on. Inspect the circuit breaker/fuse in the power circuit to the alarm. If problems persist, call a qualified electrician to inspect the house wiring and connection.
  • R
    Renee ChangSep 3, 2025
    What to do if my FireAngel Smoke Alarm fails to learn-in to a network?
    • M
      Miranda BallSep 3, 2025
      Make sure your FireAngel Smoke Alarm is 'unlearned' before trying to learn-in to a network. Also, ensure the whole Wi-Safe 2 network is working correctly by rebuilding the network.

FireAngel ST-230 Specifications

General IconGeneral
Power Source9V Battery
Sensor TypeOptical
Alarm Volume85 dB
Test ButtonYes
LED IndicatorYes
Battery Life10 years
Operating Temperature0°C to 40°C
Warranty5 years
Standards ComplianceEN 14604:2005

Related product manuals