FireAngel LSI-601 - User Manual

Questions and Answers

C
Charles FrancisAug 18, 2025
What to do if my FireAngel LSI-601 Smoke Alarm activates when no smoke is visible?
- K
  Kiara GutierrezAug 18, 2025
  If your FireAngel smoke alarm goes off when there's no visible smoke, first, consider its location. Then, clean the smoke alarm. For the LSI-601 model, wipe the cover with a damp cloth to remove static electricity. Also, check if the battery is correctly fitted and replace it if it's been in use for over 12 months. If the problem persists, contact technical support.
W
Walter SpencerAug 20, 2025
What to do if my FireAngel Smoke Alarm does not sound during testing?
- D
  Daniel HernandezAug 20, 2025
  If your FireAngel smoke alarm doesn't sound when you test it, make sure you press the test button firmly. If the unit is in low sensitivity mode, wait 15 minutes and try again. Also, try replacing the battery. If a new battery doesn't solve the issue, contact technical support.
P
Pamela JonesAug 23, 2025
What to do if my FireAngel Fire Alarms activates when no smoke is visible?
- J
  James MatthewsAug 23, 2025
  If your FireAngel smoke alarm is activating when no smoke is visible, first check its location to ensure it's appropriately placed. Clean the smoke alarm to remove any potential dust or debris. For LSI-601 models, wipe the front cover with a slightly damp cloth to eliminate static electricity. Also, verify that the battery is correctly fitted and replace it if it has been in service for more than 12 months. If these unwanted alarms persist, further assistance can be obtained by contacting technical support.
L
Louis Holmes DVMAug 25, 2025
What to do if my FireAngel Fire Alarms does not sound during testing?
- W
  William MillerAug 26, 2025
  If your FireAngel smoke alarm doesn't sound during testing, make sure you are pushing the test button firmly. If the unit is in low sensitivity mode, it may not test; wait 15 minutes and try again. If it still fails, replace the battery. If a new battery doesn't solve the issue, contact technical support.
H
Heather AndersonAug 27, 2025
Why does my FireAngel Smoke Alarm chirp intermittently?
- G
  georgeduncanAug 28, 2025
  If your FireAngel smoke alarm is chirping intermittently, first, ensure the chirping is actually coming from the smoke alarm and not another device. If it is, try replacing the battery. If the battery is new and the chirping continues, contact technical support.
C
Cody RossAug 30, 2025
What to do if my FireAngel Smoke Alarm goes into alarm when first connecting the battery?
- Q
  qbaileyAug 30, 2025
  When you first connect the battery, your FireAngel smoke alarm needs a short time to settle, and should stop automatically. If it doesn't, wipe the front cover with a slightly damp cloth to remove any static.
T
Todd CookSep 2, 2025
Why does my FireAngel Fire Alarms chirp intermittently?
- V
  vancenicoleSep 2, 2025
  If your FireAngel smoke alarm chirps intermittently, first, ensure the chirping is actually coming from the smoke alarm and not another alarm (like a carbon monoxide or burglar alarm). If the smoke alarm is the source, try replacing the battery. If the chirping continues after replacing the battery, contact technical support.
T
Tiffany WoodsSep 4, 2025
Why does my FireAngel Fire Alarms go into alarm when first connecting the battery?
- B
  Brian SmithSep 4, 2025
  When you first connect the battery, your FireAngel smoke alarm may need a short time to settle. The alarm should stop automatically after a short time. If the alarm continues, and you have the LSI-601 model, static electricity might be the cause. Wipe the front cover with a slightly damp cloth to remove any static.
C
Carla LoganSep 7, 2025
What to do if my FireAngel LSI-601 does not test when installed?
- J
  Jodi RamirezSep 7, 2025
  If your FireAngel smoke alarm doesn't test when installed, make sure you have removed the protective terminal ribbon from the battery before reconnecting.
J
John LiSep 9, 2025
What to do if Escape Light does not illuminate at all when FireAngel Smoke Alarm unit is in alarm?
- E
  Elizabeth FlynnSep 9, 2025
  There is a slight delay between the alarm sounding and the escape light illuminating in test mode and in full alarm condition. If the escape light does not illuminate at all when testing or when the unit is in full alarm then contact FireAngel Technical Support.