Need help?Do you have a question about the FireClass FC503 and is the answer not in the manual?
General| Brand | FireClass |
|---|---|
| Model | FC503 |
| Category | Control Panel |
| Language | English |
Explains symbols used in the manual for warnings.
Overview of FC503 and FC506 panels, their features, and specifications.
Lists and describes optional accessories for the control panels.
Details about the input capabilities of the FC503 and FC506 panels.
Explains how the control panel outputs operate.
Describes the panel's delay to alarm function and its signals.
Details the signals and actions during an alarm status.
Explains the operation of the control panel in Day or Night Mode.
How to use the SILENCE key to restore silenceable outputs to standby.
Explains the status signals indicated by the control panel LEDs.
Describes the panel's buzzer signals for different statuses.
Details the four access levels and user permissions for panel operation.
Information on managing users and installers.
Details on power supply system and battery requirements.
Lists control keys for the FC500 repeater and their functions.
Describes the LEDs on the FC500 repeater.
Explains the function of the Silence key on the panel.
Explains the function and usage of the Reset key.
Details the function of each LED indicator on the control panel.
Describes the external and internal components of the control panels.
Step-by-step instructions for installing the control panel.
Instructions for installing FC503 or FC506 panels as client panels.
Details the terminals for the FC503 control panel.
Details the terminals for the FC506 control panel.
Describes the terminals for connecting telephone lines.
Details the [NC][NO][C] fire output.
Details the [NC][NO][C] fault output.
Describes the SC2 sounder circuit and its programmable features.
Explains the OC1-OC2 programmable auxiliary outputs.
Describes the resettable auxiliary power supply.
Details the RS485 terminals for repeaters and modules.
Describes the battery terminals.
Explains internal and external wiring standards.
How to connect addressable devices to the panel loops.
Describes the SC and address numbers for bell outputs.
Steps for connecting the main power supply to the control panel.
Instructions for connecting and adjusting the thermal probe.
Guidance on regular testing and periodic maintenance.
Overview of managing systems via user interface or console.
How to navigate and use the panel's user interface.
Explains the functions of the alphanumeric keypad for input.
Explains the functions of ESC and ENTER keys for navigation.
Describes the assisted procedure for text entry.
How to select a single value from a set of options.
Explains ESC and ENTER key functions in single selection.
How to select multiple values from a set of options.
How to enter and set the date and time.
Explains ESC and ENTER key functions for date/time entry.
How to enter numeric data using the keypad.
Functions of cursor keys in the MAIN screen.
Functions of ESC and ENTER keys in the MAIN screen.
How to insert the installer password.
ESC/ENTER key functions for password insertion.
Navigating and using the PROGRAM screen.
ESC/ENTER key functions in the PROGRAM screen.
Using the Auto option for device enrollment.
Performing auto-enrolling for device installation.
Choosing how sounders are triggered by zone or panel alarm.
Assigning zones to enrolled detectors and outputs.
Selecting a loop for device programming.
Selecting and programming individual devices on a loop.
Enabling activation of the programmable Remote LED.
Programming sounder and beacon settings separately.
Entering a label for a software zone.
Enabling or disabling zones for WALK TEST mode.
Configuring sounders to activate for 3 seconds during test events.
Programming delayed activation of smoke detectors.
Programming a common delay to alarm time for zones.
Selecting the type of panel on-board output.
Activating an output if a system part is disabled.
Selecting if output stays active until SILENCE/RESET key.
Setting output to automatically deactivate after a time.
Configuring FC500MFI modules within the network.
ESC/ENTER key functions for network configuration.
Using On Demand Map Device feature for addressing.
Cursor key functions in map device screen.
ESC/ENTER key functions in map device screen.
Accessing the USB programming screen.
Selecting system language and configuring options.
Programming Day, Night, or Auto mode for the panel.
Entering the zone relevant delay to alarm time.
Copying delay to alarm time to all zones.
Setting active time for monostable outputs.
Selecting to display or remove the customizable front screen.
Setting loops to work in 2-wire mode.
How to access the MODIFY menu using installer passwords.
How to access the DISABLE menu using installer passwords.
Enabling or disabling passwords using the 7 key.
Enabling or disabling all sounders on the panel or loop.
The first phase of the quick start-up procedure for device enrollment.
The final phase of auto-addressing for device location.
Automatically assigning acquired devices to predefined zones.
Describes the FC500IP module for LAN connection.
Describes the 4B Universal base for detectors.
Details the FC460H/FC400H heat detector and its modes.
Details the FC460P/FC400P optical smoke detector.
Details the FC460PH/FC400PH smoke & heat detector.
Describes the FC410LI line isolator module.
Describes the FC410MIM mini input module for fire contacts.
Describes the FC410MIO multi I/O module.
Describes the FC410SIO single input/output module.
Describes the FC420CP indoor break glass callpoint.
Describes the FC421CP outdoor break glass callpoint.
Describes the FC430SB loop low power sounder base.
Describes the 4B-I isolator base assembly.
Describes the FC490ST tool for programming loop addresses.
Describes the FC410CIM contact input module.
Describes the FC410DIM module for connecting conventional detectors.
Describes the FC410RIM relay interface module.
Describes the FC410BDM beam detector interface module.
Describes the 801RIL remote LED indicator.
Describes the 801HL remote LED indicator.
Describes the HVR800 high voltage relay module.
Describes DPK4 and DPK4I duct probe units.
Describes the FIRERAY 50/100 optical beam smoke detector.
Describes the FireRay 5000 motorised beam smoke detector.
Describes FC410LP series loop powered sounders/beacons.
Describes FC410LPBS series loop powered sounders/beacons.
Describes FC430LPBSB loop powered sounder/beacon base.
Describes the FC410SNM sounder notification module.
Describes the FC410DDM module for conventional detectors.
Describes the FC410QMO quad monitored output module.
Describes the FC410QRM quad relay module.
Describes the FC410QIO quad input/output module.
Describes the FC440SB addressable base sounder.
Steps to upgrade firmware using the console software.
Provides technical specifications for the control panel and repeater.
Describes the terminals on the main board and power supply.
To Next Page
