Need help?Do you have a question about the FireClass 500 and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Input Voltage | 230 VAC |
| Frequency | 50/60 Hz |
| Type | Fire Alarm Control Panel |
| Battery Backup | Yes |
| Operating Temperature | 40°C |
| Humidity | Up to 95% RH, non-condensing |
| Enclosure Rating | IP30 |
| Compatibility | FireClass devices |
Describes panel states like Warning, Pre-alarm, Alarm, Fault, and Day/Night modes.
Describes the purpose and operation of each key on the control panel.
Step-by-step instructions for mounting the control panel and repeaters.
Detailed explanation of all terminal connections on the main board and power supply.
Managing database options and programming detectors, inputs, and outputs.
Procedures for auto-enrolling devices and restoring default settings.
Steps for programming individual devices, software zones, outputs, and network settings.
Steps for powering on, initialising, and enrolling devices on the system.
Detailed explanation of the function and voltage/current for each terminal.
To Next Page
