Description of Parts
This section describes the components of the FC500
serie Control panels, and FC500REP Repeater.
Unless otherwise stated, the numbers in boldface in this
Manual refer to the Tables ands Diagrams in this sec
-
tion.
The parts identification numbers in the diagrams go cloc
-
kwise.
P. Description
1 Surface Cable conduit entry
2 Door screws
3 LED label slots
4 KEYs label slots
5 Display
6 User interface board
7 Nuts to secure the User interface board on the
cover of Control Panel or Repeater
7a Earth connection (see figure 3)
P. Description
8 Flat cable: for the Display module board con
-
nection with User interface board
9 Jack for the connection between display mo
-
dule and User interface board
10 Flat cable: for the User interface board con
-
nection with Main board
11 Jumper to Default programming (Future use)
(Default //)
12 Anchor screw locations
13 Signalling LEDs Label
14 Identification Keys Label
15 Main Board
16 Switching power supply support
17 Switching power supply screw
18 Switching power supply
19 Anchor for power supply wires
20 Batteries (NOT supplied):
FC510, FC520 = 2 da 12 V 17 Ah
(Accessory item: 2 da 12V 38 Ah -see figure 16-
21 Chased cable conduit entry
22 Thermal probe
14 Addressable Fire Control Panels FC500
To Next Page
Loading...
