FireClass 500 - Insert Password

Insert password
After the F1 Key is pressed the Figure 34 will shown;
in this phase:
the default installer code is 00000: every digit will be
hidden by *(star) symbol.
Alphanumeric keypad Use the Alphanumeric keypad
to insert the password of 5 digit.
Cursor keys
No function is related to UP key.
No function is related to Down key;
No function is related to Right key;
No function is related to Left key.
ESC Key
Use the ESC key to cancel the input of pa
-
ssword and to step back to previous page.
ENTER key
Use the ENTER key to confirm the pa
-
ssword.
Function key
No function is related to F1 key.
No function is related to F2 key.
Use the F3 key to cancel the digits of password, if mista
-
ken; insert the new digits;
No function is related to F4key.
If a Password is wrong or missing, the following screen
will appear:
to return to the previous screen, press the Esc button or
wait for a few seconds
PROGRAMMING FROM THE PANEL 43
Master Control Panel l3-stat: PROGRAM
INSTALLER
Insert the Password
[____ ]_
Name of Control Panel
Spaces to insert the password
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel
Status
Access Level
Figure 34 Insert password (Installer code).
Master Panel lev.3 : PROGRAM
INSTALLER
Wrong Password
Figure 35 Display Wrong Password