FireClass 500 - KEY - Insert-Modify Password

In both cases: Auto OK or NOT, the Loop details will
shown (see Figure 37c).
In this phase:
Cursor Keys
The UP key: shows information relating
to the next Loop;
The Down Key: shows the information relating to the
previous Loop;
No function is related to Right Key;
No function is related to Left Key .
+
Attention: when the Enrolling is done, the devices pro
-
gramming data (except their assigned names) will re
-
store to the manufacturers settings (Default) ; therefore
a previous configuration will be lost (Choise 1).
0 KEY - insert-Modify password
In this phase (see figure 38):
Installer Code at Default is 00000; every digit will be
masked by * symbol.
Alphanumeric keypad Use the Alphanumeric keypad
to insert the password of 5 digit.
Cursor keys
No function is related to UP key.
No function is related to Down key;
No function is related to Right key;
No function is related to Left key.
ESC Key
Use the ESC key to cancel the input of pa
-
ssword and to step back to previous page.
ENTER key
Use the ENTER key to confirm the pa
-
ssword.
Function key
No function is related to F1 key.
No function is related to F2 key.
Use the F3 key to cancel the digits of password, if mista
-
ken; insert the new digits;
No function is related to F4.
PROGRAMMING FROM THE PANEL 45
Control panel master lev 3: PROGRAM
Slaves=NO Rep. =NO ENT to view details
Loop list with
Autoscan results
Presence of
slave panel
Loop1=OK Loop2=OK
Presence of
repeaters
Differences found!
1:New configuration
a)
b)
2:Add new devices
3:Discard changes
Loop= 01 l3-stat: PROGRAM
Modules : 125
Status: Working
Loop Num.
ILoop=073 mA
Loop current value Loop Status
Detectors: 125
Detectors Num.
c)
Modules
numbers
Name of Control Panel
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel
Status
Access Level
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel
Status
Access Level
d)
Control panel master lev 3: PROGRAM
Name of Control Panel
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel
Status
Access Level
ENROLLING IN PROGRESS
PLEASE WAIT
Figure 37 Auto (Enrolling) results pages
Master Control Panel l3-stat: PROGRAM
INSTALLER
Insert the NEW Password
[____ ]_
Name of Control Panel
Spaces to insert the password
This symbol shows the presence
of the connection between the
User Interface and the Main Board
Control panel
Status
Access Level
Figure 38 Insert-Modify password (Installer code).