EasyManua.ls Logo

FireClass FC600 Series - User Manual

FireClass FC600 Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Guide
120.515.930_FC-FC600-P-I
Doc. version 2.0
24. March 2021
FIRECLASS
FC600 Series
Panels and
Repeaters

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the FireClass FC600 Series and is the answer not in the manual?

FireClass FC600 Series Specifications

General IconGeneral
BrandFireClass
ModelFC600 Series
CategoryControl Panel
LanguageEnglish

Summary

Introduction to FireClass FC600 Series Panels

Keywords and Symbols in Documentation

Explains symbols used for warnings and informational notes in the manual.

Target Audience for the Manual

Identifies the intended users of this installation guide.

Scope of Installation Guide

Details topics not covered in this manual, such as system design.

Installation Notes and References

Safety Warnings for Panel Installation

Overview of FireClass FC600 Series Panels

Optional Mounting Plate for FC600 Panels

Information on the availability and part number of an optional mounting plate.

Wall Mounting FC600 Panels Without Plate

Step-by-step guide for mounting FC600 series panels directly to a wall.

Inter-Unit Cabling Procedures

Connecting Mains Cable and Protective Earth

Instructions for safely connecting mains power and earth to panels and repeaters.

Loops Installation Guide

Running and Temporarily Connecting Loops

Procedure for laying out loop wiring and making temporary connections for testing.

Interfacing Conventional Detectors

Guidance on using interface modules for conventional detectors on loops.

Performing Insulation Checks on Loops

Instructions for conducting insulation resistance tests on loop circuits.

Wiring Remaining Modules to Loops

Instructions for connecting other modules and isolator bases to the loops.

Measuring Loop Resistance

Process for measuring and recording loop resistance values.

Final Loop Connections

Steps to complete the permanent wiring of loop conductors.

Installing System Batteries

Mounting CUI Repeater Panels

Connecting CUI Repeater DC Supply Cabling

Procedure for connecting the DC power supply to the CUI repeater.

Connecting CUI Repeater RBus Wires

Guide for wiring the RBus communication lines for CUI repeaters.

Providing Installation Records

Final Checks Before System Completion

Installing the FC-FI;FC-FI-1 Field Interface Board

Local FC-FI;FC-FI-1 Board Connections

Details on making local connections to the FC-FI/FC-FI-1 interface board.

Connecting Local Sounders to the Board

Instructions for connecting sounders directly to the FC-FI/FC-FI-1 board.

Connecting Supervised Inputs

Guide for connecting supervised inputs to the FC-FI/FC-FI-1 board.

Checking FC-FI;FC-FI-1 Board Connections

Diagrams and information for verifying FC-FI and FC-FI-1 board connections.

FC-FI;FC-FI-1 Switches and Jumper Positions

Identifies the locations of switches and jumpers on the FC-FI/FC-FI-1 boards.

Jumper and DIP Switch Settings

Explains default and special configuration settings for jumpers and DIP switches.

Configuring FC600 Panel RBus Interface

Details how DIP switches control the RBus interface configuration.

Changing Fuses on the FC-FI;FC-FI-1 Board

Installing Optional Boards, Cards, and Modules

Obtaining Card Addresses for Installation

Procedure for finding and assigning unique addresses to installed cards.

Planning Card Arrangement

Guidance on planning the physical layout of stacked cards within the panel.

Mounting Cards and Boards on FC600 Panel

Detailed instructions for physically mounting cards and boards onto the panel.

Installing the PN1800 Panel Net Interface

Changing a Fuse on the PN1800 Panel Net Interface

Instructions for replacing the user-replaceable fuse on the PN1800 card.

Mounting the FB800 15 WAY Fuse Board

FB800 Fused 24 V Outputs Board Details

Details terminal layout and functions for the FB800 15WAY fuse board.

Binary DIP Switch Lookup Table

Related product manuals