25 Installation Guide Doc. version 2.0
Checking the FC-FI/FC-FI-1 connections FireClass Panels and Repeaters
11.4 Checking the FC-FI/FC-FI-1 connections
The FC-FI connections are shown in Fig. 19. The FC-FI-1 connections are shown in Fig. 20. Not all of these are cov-
ered in this guide.
Fig. 19: FC-FI Connections
1– Loops, supervised input 1, supervised input 2, sounder, alarm and fault relay, 24V, emergency alarm (EA).
2– To the batteries. Marked ‘XT10 BAT’ on the PCB.
3– DC cable (black, twin conductor). Marked ‘XT9 PSU’ on the PCB.
To Next Page
Loading...
