Need help?Do you have a question about the FireClass FC506 and is the answer not in the manual?
General| Event log | Up to 500 events |
|---|---|
| Power supply | 230V AC, 50Hz |
| Operating Temperature | -5°C to +40°C |
| Enclosure Rating | IP30 |
| Sounder circuits | 2 monitored circuits |
| Input Voltage | 230V AC |
| Battery Backup | 2 x 12V 7Ah sealed lead acid batteries |
| Weight | 3.5kg |
Details items included in the control panel box.
Describes the Delay to Alarm time and its signals.
Describes the Alarm status signals and actions.
Describes installer-level access for programming and opening.
Details the power supply system and battery requirements.
Step-by-step guide for physically installing the control panel.
How to connect addressable devices to the panel loops.
Steps to connect the mains power supply.
Describes installer level access L3 for programming.
Details the auto-enrolling (auto-learning) process.
How to choose the loop for device selection.
How to choose a device for programming.
How to enable/disable SW zones in WALK TEST mode.
Enabling or disabling passwords.
First phase of the quick start-up procedure.
Steps to upgrade firmware using the console software.
To Next Page
