FireClass FC506 - Alphanumeric Keypad; Cursor Keys; ESC and ENTER Keys

work. If the address is not correct, you need to enter
a new address. The display on Figure 40 is shown.
In this phase, the keypad and keys have the
following functions:
Alphanumeric keypad
Use the alphanumeric keypad to insert the 1 digit
address.
Cursor keys
No functions are related to the Up, Down, Right, or
Left keys.
ESC and ENTER keys
Table 55: ESC and ENTER key function in NEW
repeater address
Key Function
ESC Cancel the operation or return
to the previous screen
ENTER Confirm the address
Note: If the address of a repeater is changed
by mistake, the system shows the message in
Figure 38. You can change the address of the
repeater using the ESC key.
Figure 40: Serial link is down
FC503 and FC506 Addressable Fire Control Panels62
Johnson Controls - CONFIDENTIAL