is 00000 and every digit will be masked by an
asterisk.
In this phase, the keypad and keys have the
following functions:
Alphanumeric keypad
Use the alphanumeric keypad to insert a 5 digit
password. The first digit must be 0 for INSTALLER
1 (Main Installer) and 9 for INSTALLER 2. The panel
verifies the correct entry of the identification digit.
In the case of an error, a denial tone is generated.
Cursor keys
No functions are related to the Up, Down, Right, or
Left keys.
ESC and ENTER keys
Table 23: ESC and ENTER key function in insert
modify password screen
Key Function
ESC Long press (press for more than
1 s): use to clear all the entered
digits
Short press (press for less than
32 ms): use to abort the enter
password procedure and return
to the Calling screen.
ENTER Use to accept and verify the
password.
If the password is incorrect, the Wrong Password
screen will display for 5 seconds. See Figure 22.
To avoid entering duplicate passwords, use a
specific digit as the first digit of your password.
Refer to Table 24 for the first digit of the password
for each user or installer.
Table 24: First digit of password
User or Installer First digit of password
USER 1 1
USER 2 2
USER 3 3
USER 4 4
USER 5 5
USER 6 6
USER 7 7
Table 24: First digit of password
User or Installer First digit of password
USER 8 8
INSTALLER 1 0
INSTALLER 2 9
Figure 24: Modify password screen
Callout Description
1 Control panel name
2 Access level
3 Control panel status
4 If blinking, the control panel is
working properly
5 Field to insert password
Auto
Use the Auto option from the PROGRAM menu
to enroll the loop devices and the RS485 network
devices automatically for repeater FC500.
The Auto option consists of three main phases:
1. Auto-enrolling
2. Auto-addressing
3. Devices mapping.
Key- Auto-enrolling (auto-
learning)
Auto-enrolling (auto-learning) can be done during
the installation phase and after changes of the loop
and network configurations.
Use the 1 Key to select the Auto option. See Figure
25.
FC503 and FC506 Addressable Fire Control Panels42
Johnson Controls - CONFIDENTIAL