EasyManua.ls Logo

FireClass FC506 - MAIN screen - accessing the system; Insert password

Default Icon
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAIN screen - accessing the
system
When you access the panel for the first time after
installation, you will be prompted to choose the
display language. When you select the language,
the MAIN screen displays. See Figure 21.
Figure 21: MAIN screen
Callout Description
1 Access level
2 Control panel status
3 If blinking, the control panel is
working properly
4 Control panel name
5 Current phase
In this phase, the keypad and keys have the
following functions:
Alphanumeric keypad
Table 17: Alphanumeric keypad function in MAIN
screen
Key Function
1 Display Program or Analyze
2 Display Disable or View List
3 Display Modify or View Log
4 Select between groups of
related functions of keys 1, 2,
and 3
Cursor keys
Table 18: Cursor key functions in MAIN screen
Key Function
Up Use to increase the brightness
of the LCD display
Down Use to decrease the brightness
of the LCD display
Right Use to increase the contrast of
the LCD display
Left Use to decrease the contrast of
the LCD display
ESC and ENTER keys
Table 19: ESC and ENTER key function in MAIN
screen
Key Function
ESC Use to exit the MAIN screen and
to move from the user interface
to the front screen or event
driven screen, if any. If you
press the ESC key for more than
3 seconds, the panel will access
level 1.
ENTER No function
Note: When the panel starts its normal activity
and there is no access to the user interface
for a period of 30 seconds, the user interface
leaves the MAIN screen and reaches the front
screen. For more information, refer to the
description of the MAIN screen in the FC503
and FC506 Addressable Fire Control Panels User
Manual.
Insert password
Select the 1 key, Program, from the MAIN screen to
insert the installer password required to operate at
L3. The default installer password is 00000. All digits
will be masked with an asterisk.
In this phase, the keypad and keys have the
following functions:
Alphanumeric keypad
Use the alphanumeric keypad to select the 0 key
and access the display.
FC503 and FC506 Addressable Fire Control Panels40
Johnson Controls - CONFIDENTIAL

Table of Contents

Other manuals for FireClass FC506

Related product manuals