FireClass 500 - User Mode

+
The wire database data is stored in the file "Wire
-
sList.fcw" inside the FireClass 500 Console Lan
-
guage folder. The database can be moved from
one system to another. The Console searchs for
the wire database while starting, so, if the user can
-
not access a moved database, simply close the
software, and start it again.
Print a text file; in this case the calculation used to
determine the loop charge and establish the type of bat
-
tery required.
User mode
User mode provides an introduction to the use of Grap
-
hical maps. For an explanation of how it works and how
to use it, select the Help command from the menu or
from the Graphical Maps themselves.
40 Addressable Fire Control Panels FC500