FC430SAM: NOT active
FC421CP: Call-point fully active
FC410CIM: inputs style=C,NO
FC410DIM: standard mode
FC410BDM: standard mode
FC410RIM NOT active
+
All modules activation will generate panel ALARM
n
Zones
No zone active
n
Panel outputs
“NAC FIRE” (output EN54-2 type C) active on alarm
event
“FIRE” (dry contact) active on alarm event
“FAULT” (dry contact) active on fault event
n
Conventional zone
Active,
pre-alarm on detector activation (680 W load),
alarm on call-point activation (270 W load),
n Panel general option
Pre-alarm time: 60s
Investigation time: 300s
Silence time: 30s
Mains fault delay: 1min
Day mode
Loop configuration: 4 wires
QUICK START-UP PROCEDURE 53
To Next Page
Loading...
