FireClass 500 - Icons Description; File

munication, Options, DataBase, Mode setup and
Help menus, in the top left-hand corner of Main window.
n
Icons description
Click-on this icon under "Panel 1" the window "New
panel" will open, Figure 21. Here, you can choose the
type of control panel, the Firmware Release, the control
panel name and the possible address if more control
panel are present in the system.
Description of the icons under "Panel 1"
Ø
Click-on this icon and then confirm to restore the
factory defaults.
Ø Click-on this icon to download the programming
(via serial link) to the connected control panel.
Ø Click-on this icon to upload all the programming
(via serial link) of the connected control panel.
Ø Click-on this icon to see the firmware version of
MainBoard , Loop controller, User Interface, Repeater
and FMI module.
Ø Clicking on the icon begins operation in Real
Time, in other words it is possible to view the status
of the FC500 control panel in real time and on a com
-
puter using the FC500IP module connected to the
network or using the serial port.
Ø
Click the icon to select the Real Time operating
mode: using the FC500IP module (enter IP address) or
using the serial port (select the port).
Ø
Click-on this icon to add a new Loop ex
-
pansion board.
Ø
Click-on this icon to remove a Loop ex
-
pansion board.
Ø
Click-on this icon to open the Data custo
-
mer window.
Ø
Click-on this icon to insert-modify the
Installer Password.
Ø
Selected a stored customer, click-on this
icon to delete the customer, after confirm:
OK.
Ø
Click-on this icon, in a Master control panel, a
window in Figure 21 will be shown. In this window, a
Slave control panel can be inserted with a name and
an address, the same programmed address from the
user interface of Slave control panel (see Program-
ming from the panel).
Ø Click-on this icon to remove the selected Slave
control panel, after a request of confirmation.
n File
The File options (New, Open, Save, Close,
Export/Import configuration file, Exit) will allow you
to manage customer account data.
New (New customer)
The New option creates a
New customer and restore the factory default to all pro
-
gramming parameters.
30 Addressable Fire Control Panels FC500
Figure 21 New panel window(Type of control panel)
Figure 22 "Open" window .
Figure 23 Firmware Upgrade window