Fireray 3000 User Manual

23
• This screen allows the user to change the Pass Code used to access the ENGINEERING MENU.
NOTE: The number being altered flashes. A partial passcode (ie. with dashes in it) will not be accepted.
7.3.2 Passcode Change Screen
Change digit
Move between digits
Save new Pass Code
Abort change
Default Pass Code: 1 2 3 4

Fireray 3000 Specifications

General

Detection Range	Up to 100m
Operating Temperature	-10°C to +55°C
IP Rating	IP65
Alarm Relay	1A @ 30V DC
Fault Relay	1A @ 30V DC
Detection Principle	Infrared beam
Response Time	10 seconds
Alarm Output	Relay
Current Consumption	≤25mA (standby), ≤45mA (alarm)